Buy M5Stack Core2 ESP32 with Touch Screen Development Board Kit WiFi bluetooth Graphical Programming WiFi BLE IoT M5Stack for Arduino – products that work with official Arduino boards wholesale price
Description:
M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores.
The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. WiFi and Bluetooth are supported as standard and it includes an on board 16MB Flash and 8MB PSRAM, USB TYPE-C interface for charging, downloading of programs and serial communication, a 2.0-inch integrated capacitive touch screen, and a built-in vibration motor.
M5Core2 also features a built-in RTC module which can provide accurate timing. The power supply is managed by an AXP192 power management chip, which can effectively control the power consumption of the base and a built-in green LED power indicator helps to notify the user of battery level. The battery capacity has been upgraded to 390mAh, which can power the core for much longer than the previous model.
The M5Core2 retains the SD card slot and speakers. However, in order to ensure higher quality sound output, the I2S digital audio interface power amplifier chip is used to effectively prevent signal distortion. There are independent power and reset buttons on the left side and bottom of the base.
The 3 icons on the front of the screen are capacitive buttons which are programmable. There is a small expansion board on the back of the base with a 6-axis IMU sensor and microphone. The development platform and programming language supported by M5Stack Core2: Arduino, UIFlow (using Blockly, MicroPython language) No matter what level of your development and programming skills, M5Stack will help You gradually turn your ideas into reality.
Power on/off:
Power on: click the power button
Power off: press the power button for 6s
Restart: Click the RST button at the bottom
Features:
ESP32-based, built-in Bluetooth,WiFi
16M Flash,8M PSRAM
Built-in speaker, power indicator, vibration motor, RTC, I2S amplifier, capacitive touch screen, power button, reset button
TF card slot (16G Maximum size)
Built-in lithium battery, equipped with power management chip
Independent small board built-in 6-axis IMU, PDM microphone
M-Bus Socket & Pins
Package Included:
1x M5Stack Core2
1x Type-C USB(20cm)
Applications
Internet of things terminal controller
Stem education product
DIY creation
Smart home equipment
Specification:
Resources | Parameter |
ESP32-D0WD-V3 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth |
Flash | 16MB |
PSRAM | 8MB |
Input Voltage | 5V @ 500mA |
Interface | TypeC x 1, GROVE(I2C+I/0+UART) x 1 |
IPS LCD Screen | 2.0’@320*240 ILI9342C |
Touch Screen | FT6336U |
Speaker | 1W-0928 |
LED | Green power indicator light |
Button | Power button, RST button, Virtual screen button*3 |
Vibration reminder | Vibration motor |
MIC | SPM1423 |
I2S Power Amplifier | NS4168 |
6-axis IMU | MPU6886 |
RTC | BM8563 |
PMU | AXP192 |
USB Chip | CP2104 |
DC-DC Boost | SY7088 |
TF card slot | 16G Max. |
Lithium Battery | 390mAh @ 3.7V |
Antenna | 2.4G 3D antenna |
Operating temperature | 32°F to 104°F ( 0°C to 40°C ) |
Net Weight | 52g |
Gross Weight | 70g |
Product Size | 54 x 54 x 16mm |
Package Size | 75 x 60 x 20mm |
Case Material | Plastic ( PC ) |
EasyLoader:
EasyLoader is a concise and fast program writer, which has a built-if program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host Please click here to view the CP210X driver installation tutorial, M5StickC/V/T/ATOM series can be used without driver)
PinMap:
LCD & TF card
LCD :320×240 TF card Maximum size 16GB
ESP32 Chip | GPIO38 | GPIO23 | GPIO18 | GPIO5 | GPIO15 | |||
AXP192 Chip | AXP_IO4 | AXP_DC3 | AXP_LDO2 | |||||
ILI9342C | MISO | MOS1 | SCK | CS | DC | RST | BL | PWR |
ESP32 Chip | GPIO38 | GPIO23 | GPIO18 | GPIO4 |
TF Card | MISO | MOS1 | SCK | CS |
CAP.TOUCH:
ESP32 chip | GPIO21 | GPIO22 | GPIO39 | |
AXP192 | AXP_IO4 | |||
FT6336U | SDA | SCL | INT | RST |
Mic & NS4168:
ESP32 Chip | GPIO12 | GPIO0 | GPIO2 | AXP_IO2 | GPIO34 |
NS4168 | BCLK | LRCK | DATA | SPK_EN | |
Mic | CLK | DATA |
AXP Power Indicator Light:
AXP192 | AXP_IO1 | AXP_LDO3 |
Green LED | Vcc | |
Vibration motor | Vcc |
RTC:
ESP32 Chip | GPIO21 | GPIO22 | |
AXP192 | AXP_PWR | ||
BM8563 | SDA | SCL | INT |
IMU(3-axis gyroscope & 3-axis accelerometer):
ESP32 Chip | GPIO21 | GPIO22 |
MPU6886 | SDA | SCL |
USB to serial chip:
ESP32 Chip | GPIO1 | GPIO3 |
CP2104 | RXD | TXD |
Internal I2C connection:
ESP32 Chip | GPIO21 | GPIO22 |
MPU6886 | SDA | SCL |
AXP192 | SDA | SCL |
BM8563 | SDA | SCL |
FT6336U | SDA | SCL |
M5PORT EXPLAIN:
Weight | 0.082 kg |
---|
User Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
RECENT PRODUCT REVIEWS
M5Stack Core2 ESP32 with Touch Screen Development Board Kit WiFi bluetooth Graphical Programming WiFi BLE IoT M5Stack for Arduino – products that work with official Arduino boards
$79.79
Log In
Reset Password
6V 10W 1.7A Portable Solar Panel USB Solar Charging Board Charger - $33.24
Its very good item for me, usually I am using this for charging my power bank (10000mah). Very good.
Tanix TX3 Mini+ Amlogic S905W2 DDR3 2GB RAM eMMC 16GB ROM 5G WiFi Android 11 Smart TV Box AV1 H.265 4K@30fps Video Decoder OTT Box -
$65.53$55.32I bought one for us. And to be honest I was VERY SCEPTICAL. But once installed the sky is the limit on what you can do. Our kids are grown with their own children and even the grandchildren know how to operate it and love the video options. So we decided to get them their own and not to brag but mom and dads gift were the bomb. Even the grandchildren were excited
55 Degrees Celsius Constant Mug Warmer Heating Automatic Water Heater Warm Cup Warmer for Office Dorm Room - $27.99 – $29.25
After having it for a few days I love it! I tried it with different cups and mugs and you’ll want to use the a mug with a flat base to really spread the heat. I pre heat my mug while my coffee brews and it will stay hot as long as you’d like. I found the default high heat setting worked best for me. It’s not to expensive and makes a great gift. I got mine in black and it looks great on my desk at work.
High Pressure Foam Washer Jet Car Washing Lance Soap Sprayer Adjustable -
$68.19$57.98This thing really works. If you are reading a review that says it doesn’t then they r either not using it correctly or using the wrong product. I did not get paid to use this product or my personal opinion like others. I didn’t want to spend all the extra money on a fancy brand name with the same results. My pics will speak for themselves.
Wireless Weather Station Thermohygrometer Weather Forecast Alarm Clock Perpetual Calendar Moon Phase -
$62.79$52.58Nice station
Wireless Weather Station Thermohygrometer Weather Forecast Alarm Clock Perpetual Calendar Moon Phase -
$62.79$52.58Perfect nothing to say and accurate data super
Thanks to seller send fast
12 Inch LCD Update Multi Function Writing Tablet 3 in 1 Mouse Pad Ruler Drawing Doodle Board Handwriting Pads -
$33.47$23.26Lightly box is pressed in brightness, but writing data is no problem four yo ~
12 Inch LCD Update Multi Function Writing Tablet 3 in 1 Mouse Pad Ruler Drawing Doodle Board Handwriting Pads -
$33.47$23.26Arrival a few days before the scheduled date, very satisfied. Well packaged, received intact and functional, perfect for sketches, simple design but good for the price. Comes with an anti-loss strap, and the pen easy to store.
12 Inch LCD Update Multi Function Writing Tablet 3 in 1 Mouse Pad Ruler Drawing Doodle Board Handwriting Pads -
$33.47$23.26I arrived a week earlier than planned, I loved it coming with the battery included, very good product
5000W LED Full Spectrum Plant UV Grow Light Veg Growing Lamp Indoor Hydroponic - $35.72
It didn’t take long to get there, all ok