Brand Name: MATEKSYS
Item Name: F411-WTE
MCU: 100MHz STM32F411CEU6
IMU: BMI270 (SPI)
Baro: SPL06-001 (I2C)
OSD: AT7456E (SPI)
2x Full Softserial
6x PWM outputs (2x Motors, 4x Servos)
4x ADC (VBAT, Current, RSSI, AirSpeed)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Built in inverter on UART2-RX for SBUS input
Switchable Dual Camera Inputs
Vbat power ON/OFF switchable for VTX and camera
PPM receiver: not supported
6~30V DC IN (2~6S LiPo)
132A Current Sense (Scale 250)
PDB/Current sense resistor: 90A continuous, 132A burst.
BEC 5V 1.5A for FC & Peripherals
BEC Vx 5A for servos, 5V/ 6V option
Vbat for VTX and camera (ON/OFF switchable)
LDO 3.3V 200mA
Battery Voltage Sensor: 1k:10k
INAV Target: MATEKF411TE ( INAV4.1 or newer)
Dimensions: 31 x 26 x 16.5 mm
Mounting: 22 x 22mm, Φ2mm
1x FC F411-WTE
Dupont 2.54 pins (Board is shipped unsoldered)
Specification: MATEKSYS F411-WTE 100MHz STM32F411CEU6 Flight Controller Built-in OSD For RC Airplane Fixed Wing
Only logged in customers who have purchased this product may leave a review.
Its very good item for me, usually I am using this for charging my power bank (10000mah). Very good.
Excellent android box
A+ If you use the right cup!
Yes, it works!
Perfect nothing to say and accurate data super
Thanks to seller send fast
Lightly box is pressed in brightness, but writing data is no problem four yo ~
It didn’t take long to get there, all ok