BETAFPV ExpressLRS ELRS 2.4GHz 868/915MHz Up To 500Hz Rate 500mW/1W Power OLED Screen Micro TX Module with Cooling Fan RGB LED for RC Drone
The USB port housing is 6.2*11mm and may not compatible with your own USB cables. So a spare USB data cable (Type-A to Type-C) is included in the package for all order since November 18.
For previous order, if you do not have a suitable USB cable for this Micro module, feel free to contact us. Email to [email protected]
BETAFPV Micro RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
Brand Name: BETAFPV
Item Name: ELRS Micro TX Module
Version: 2.4GHz/868MHz/915MHz (500mW)/2.4GHz (1W)
Packet refresh rate:
RF output power:
Frequency bands (Micro RF Module 2.4G version): 2.4GHz ISM
Frequency bands (Micro RF Module 915MHz/868MHz version): 915MHz FCC/868MHz EU
Input voltage: 5V~12V
XT30 port: 5V~12V, recommend 2S(8.4V) battery, DO NOT support 3S(12.6V) or above
USB port: Type-C
BETAFPV Micro RF TX module is compatible with radio transmitter which has the micro module bay (AKA JR/SLIM module bay, e.g. Frsky Taranis X9D、TBS Mambo).
ELRS 2.4G 1W Version:
The black version with maximum 1W RF output power is released now. Support all 5D button dimensions based on BETAFPV ELRS V2.0.0 firmware. A new backpack function is added, allowing wireless communication between ExpressLRS, and other FPV related devices for command and control, or for querying config.
Compared with 500mW versions, it not only builds in a cooling fan but also the heat sink is included, which enhances the performance of cooling. So this module can work properly in daily use and not need to worry about temperature.
Note: Please make sure the VRX also supports backpack function when using the module VRX-backpack function. Backpack function will be added to the 500mW version in the future.
Please assemble the antenna before power on. Otherwise, the PA chip in the Micro TX module will be damaged permanently.
Please DO NOT use 3S or above bettery to power up the TX module via XT30 port. Otherwise, the power supply chip in the TX module will be damaged permanently.
The antenna in the package is not the same as picture show for 915MHz and 868MHz version.
About the Firmware:
The ExpressLRS offical project on Github does NOT support the OLED function for the moment. BETAFPV team has made a pull request on Github and wait for the offical to finish this merge. We will work with the ELRS team and make the offical repository support the OLED and button function ASAP.
Please get the firmware from BETAFPV Github nowadays until ExpressLRS offical support.
User manual of How to Flash Firmware of ELRS RX/TX. Click Here
Button and OLED:
The ELRS TX module could be configured via the OpenTX LUA script. With OLED and button, no-OpenTX radio controller that supports CRSF could use this ELRS Micro module easily. The following no-OpenTX radio controllers work well with this TX module. Futabas T16IZ, T16SZ and T18SZ (with update to 3.9e), Wsky ET16, Radiolink AT9S Pro.
There is a 5D button on the micro module. Pay attention only the virtical dimention works and the other four dimentions are invalid. Below is the basic operation of the button and OLED.
In the lock screen page, long press to unlock and enter the menu page.
In the menu page, long press to change the value of this row.
In the lock screen page, short press invalidly.
In the menu page, short press to move to the next row.
1 x ELRS Micro TX module
1 x Moxon antenna
1 x User manual
1 x Spare USB data cable (Type-A to Type-C)
Specification: BETAFPV ExpressLRS ELRS 2.4GHz 868/915MHz Up To 500Hz Rate 500mW/1W Power OLED Screen Micro TX Module with Cooling Fan RGB LED for RC Drone
Only logged in customers who have purchased this product may leave a review.
Its very good item for me, usually I am using this for charging my power bank (10000mah). Very good.
Excellent android box
I bought one for us. And to be honest I was VERY SCEPTICAL. But once installed the sky is the limit on what you can do. Our kids are grown with their own children and even the grandchildren know how to operate it and love the video options. So we decided to get them their own and not to brag but mom and dads gift were the bomb. Even the grandchildren were excited
A+ If you use the right cup!
After having it for a few days I love it! I tried it with different cups and mugs and you’ll want to use the a mug with a flat base to really spread the heat. I pre heat my mug while my coffee brews and it will stay hot as long as you’d like. I found the default high heat setting worked best for me. It’s not to expensive and makes a great gift. I got mine in black and it looks great on my desk at work.
Yes, it works!
This thing really works. If you are reading a review that says it doesn’t then they r either not using it correctly or using the wrong product. I did not get paid to use this product or my personal opinion like others. I didn’t want to spend all the extra money on a fancy brand name with the same results. My pics will speak for themselves.
Perfect nothing to say and accurate data super
Thanks to seller send fast
Lightly box is pressed in brightness, but writing data is no problem four yo ~
Arrival a few days before the scheduled date, very satisfied. Well packaged, received intact and functional, perfect for sketches, simple design but good for the price. Comes with an anti-loss strap, and the pen easy to store.
I arrived a week earlier than planned, I loved it coming with the battery included, very good product
It didn’t take long to get there, all ok
$52.12 – $65.42