Standard Shipping to
BETAFPV 2-4S 5V@2A BEC Board for Naked Camera Gopro Hero 8 FPV RC Racing Drone
BETAFPV 2-4S 5V@2A BEC Board for Naked Camera Gopro Hero 8 FPV RC Racing Drone BETAFPV 2-4S 5V@2A BEC Board for Naked Camera Gopro Hero 8 FPV RC Racing Drone

BETAFPV 2-4S 5V@2A BEC Board for Naked Camera Gopro Hero 8 FPV RC Racing Drone

$27.92

Dispatch: Ship within 1-3 days
Shipping: US $3 to via Standard Shipping
Estimated Delivery: 8 - 22 business days

Out of stock

SKU: 1754870 Category:
Added to wishlistRemoved from wishlist 0

Buy BETAFPV 2-4S 5V@2A BEC Board for Naked Camera Gopro Hero 8 FPV RC Racing Drone wholesale price

BETAFPV 2-4S 5V@2A BEC Board for Naked Camera Gopro Hero 8 FPV RC Racing Drone

To provide more choice for our customers, not only the BEC board for HERO6/7, BETAFPV also designed a new BEC board for GoPro HERO8. You don’t need to worry your GoPro will turn off during a flight anymore. This BEC board only weighs about 1.5g, which makes your naked GoPro super neat and light. This BEC Board has integrated 5V@2A BEC, stock GoPro buttons, and LED pluggable connectors and remote recording!

Description:

Brand: BetaFPV

Item: BEC Board for Naked Camera

Weight: 1.53g/1.57g

Output: 5V @ 2A

Input voltage: 2-4S 

Connector: GH 1.25 3P connector

Bullet point:

* BEC Board is specially designed for Naked GoPro HERO6/7/8 which weighs about 1.5g, makes your naked GoPro lighter and easy to install on your drone.

* The BEC output voltage is 5V@2A, avoid the accident of power of which is caused by the insufficient power supply for the FC board. Also, stock buttons and LEDs are integrated.

* Integrated GoPro stock buttons, Power/Mode Button and Record Button.

* Integrated GoPro stock LED to know the status of the camera.

* The pad is available for pilots to control the GoPro recording via the radio transmitter.

* With the pluggable connector, which is easier to connect with your flight controller for power supply and recording.

BEC Board Diagram

The two buttons on the BEC board have the same functions as the GoPro spare buttons. Three actions we will use frequently.

 * Power on-Press the power/mode button, the LED flashes three times and goes out. 

 * Start recording-Press the ‘Record’ button once and the LED flashes slowly. If the LED flashes once and goes off, it means there is no SD card. 

 * Stop recording-Press the ‘Record’ button, the LED stops blinking slowly.

LED Status 

Under normal operation, plug the GH1.25 connector into the GoPro Lite camera firstly, then connect with the battery. The LED will flash once, then you should press the Power/Mode button once in a second to power on. The LED on the BEC board has the same status as the stock LED on the GoPro mainboard.

Indication

Button Operation

LED Status

Power On

Press the Power/Mode button once

Flash 3 times and light off

Power Off

Press the Power/Mode button for 5 seconds

Flash 7 times and light off

Start Record

Press the record button once

Continuously slow flash

Stop Record

Press the record button once

Flash 3 times and light off

Mode Switch

Press the Power/Mode button once

Check the mode on LCD Display

How to Disassemble GoPro 8 Black

Special thanks to JONAH BLAESER who provided the method of disassembling GoPro HERO6/8 Black. If you are interested, please check the link to know the specific steps to make your own naked GoPro. 

GoPro HERO8 Black Disassembly Guide

Note: Do this at your own risk. You will lose your GoPro’s warranty and you may end up bricking the camera if something goes wrong. This guide is not authorized by GoPro and your camera is not guaranteed to work afterward. BETAFPV will not be held responsible for this action.

How to assemble the BEC Board on Naked Camera.

We use the Pinio function in Betaflight to control the record. First, setup the Pinio function of the B12 pin in the FC board.

resource FLASH_CS 1 NONE

resource PINIO 1 B12

set pinio_box = 40,255,255,255

save

Next, map one of the switch channels in your radio transmitter to this Pinio (aka USER1). As shown below, we map the AUX4 channel in the radio transmitter to USER1 Pinio. The cursor in the orange zone means button released and the white zone means pressed. So keep the cursor in the orange zone in default.

Third, check if the Pinio function works. Change the switch and make the cursor move from the orange zone to the white zone, and finally back to the orange zone. Now you could check the LED status to know if the record starts. Use the same process to stop recording.

If you use the 12A F4 AIO FC board, like the 85X whoop drone, you will use the LED_STRIP pin (aka A08 pin pad) for the Pinio function.

Package included:

1x  BEC Board for GoPro HERO8

1x GH1.25 Power Cable (80mm 30AWG)

3x M1.4*4 Screws

Best BETAFPV 2-4S 5V@2A BEC Board for Naked Camera Gopro Hero 8 FPV RC Racing Drone good price

Specification: BETAFPV 2-4S 5V@2A BEC Board for Naked Camera Gopro Hero 8 FPV RC Racing Drone

Weight 0.013 kg

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

RECENT PRODUCT REVIEWS
  1. Its very good item for me, usually I am using this for charging my power bank (10000mah). Very good.

  2. Excellent android box

    I bought one for us. And to be honest I was VERY SCEPTICAL. But once installed the sky is the limit on what you can do. Our kids are grown with their own children and even the grandchildren know how to operate it and love the video options. So we decided to get them their own and not to brag but mom and dads gift were the bomb. Even the grandchildren were excited 

  3. A+ If you use the right cup!

    After having it for a few days I love it! I tried it with different cups and mugs and you’ll want to use the a mug with a flat base to really spread the heat. I pre heat my mug while my coffee brews and it will stay hot as long as you’d like. I found the default high heat setting worked best for me. It’s not to expensive and makes a great gift. I got mine in black and it looks great on my desk at work.

  4. Yes, it works!

    This thing really works. If you are reading a review that says it doesn’t then they r either not using it correctly or using the wrong product. I did not get paid to use this product or my personal opinion like others. I didn’t want to spend all the extra money on a fancy brand name with the same results. My pics will speak for themselves. 

  5. Perfect nothing to say and accurate data super
    Thanks to seller send fast

  6. Lightly box is pressed in brightness, but writing data is no problem four yo ~

  7. Arrival a few days before the scheduled date, very satisfied. Well packaged, received intact and functional, perfect for sketches, simple design but good for the price. Comes with an anti-loss strap, and the pen easy to store.

  8. I arrived a week earlier than planned, I loved it coming with the battery included, very good product

  9. It didn’t take long to get there, all ok

BETAFPV 2-4S 5V@2A BEC Board for Naked Camera Gopro Hero 8 FPV RC Racing Drone

$27.92

Pricetug
Logo
Reset Password