Standard Shipping to
10W Portable uSDX 8 Band SDR All Mode Transceiver USB, LSB, CW, AM, FM HF SSB QRP Transceiver QCX-SSB with Battery
10W Portable uSDX 8 Band SDR All Mode Transceiver USB, LSB, CW, AM, FM HF SSB QRP Transceiver QCX-SSB with Battery 10W Portable uSDX 8 Band SDR All Mode Transceiver USB, LSB, CW, AM, FM HF SSB QRP Transceiver QCX-SSB with Battery 10W Portable uSDX 8 Band SDR All Mode Transceiver USB, LSB, CW, AM, FM HF SSB QRP Transceiver QCX-SSB with Battery 10W Portable uSDX 8 Band SDR All Mode Transceiver USB, LSB, CW, AM, FM HF SSB QRP Transceiver QCX-SSB with Battery 10W Portable uSDX 8 Band SDR All Mode Transceiver USB, LSB, CW, AM, FM HF SSB QRP Transceiver QCX-SSB with Battery

10W Portable uSDX 8 Band SDR All Mode Transceiver USB, LSB, CW, AM, FM HF SSB QRP Transceiver QCX-SSB with Battery

$27.92

Dispatch: Ship within 1-3 days
Shipping: US $3 to via Standard Shipping
Estimated Delivery: 8 - 22 business days

Out of stock

SKU: 1890124POA9565070 Category:
Added to wishlistRemoved from wishlist 0

Buy 10W Portable uSDX 8 Band SDR All Mode Transceiver USB, LSB, CW, AM, FM HF SSB QRP Transceiver QCX-SSB with Battery good price

NOTE:The latest version of the product appearance upgrade, performance improvement!!!

Description:
This is a shortwave QRP SSB/CW transceiver. It boasts 1602 screen, built-in battery, equipped with charger, built-in mic, built-in speaker! It can be connected to an automatic key, and can be decoded by cw.

Features:
– Using IRF series launch tube, durable
– Can be used by connecting the antenna (M seat)
– 8 bands. Power standing wave digital display! External 13.8v maximum power 10w! Built-in 12.6v battery
– Dimensions: 76 x 46 x130mm/3 x 1.8 x 5.1′
– Provide ft8 option connector later
– Use TCXO for KDS. Accuracy 0.5PPM (1PPM per year)
– Aluminum shell laser marking
– All-aluminum knobs! Translucent silica gel button (receive green, emit red)

Function List:
– Simple, interesting and versatile QRP SSB HF transceiver with embedded DSP and SDR functions
– EER E-level driven SSB launch stage
– 13.8V power supply provides about 10W PEP SSB output
– Full mode support: USB, LSB, CW, AM, FM
– DSP filter: 4000, 2500, 1700, 500, 200, 100, 50Hz passband
– DSP function: automatic gain control (AGC), noise reduction (NR), voice trigger, voice trigger Xmit (VO1X), RX attenuator attenuator (ATT), TX noise gate, TX driver control, volume control, dBm/S-meter
– SSB reverse sideband/carrier suppression transmission: better than -45dBc, IMD3 (two tones) -33dBc, reception: better than -50dBc
– Multi-band support, continuously adjustable in the 160m-10m frequency band (and performance loss from 20kHz..99MHz)
– Open source firmware, built in for Arduino IDE; allows experimentation, can add new functions, can share contributions through Github, software complexity: 2000 lines of code
– Software-based VO1X can be used as a fast full invasive (QSK and semi-QSK operation), or to assist in running in digital mode (without CAT or PTT interface) for RX/TX switching, external PTT output with TX/PA control-delay
– Simple installation modification with 8 component changes and 8 wires
– Lightweight, low-cost transceiver: Thanks to EER transmitter E-level, it has high power efficiency (no bulky heat sink required), and simple design (no need for complex balanced linear power amplifiers)
– SSB transmitter stage based entirely on digital and software: By controlling the phase of the SI5351 PLL (via the tiny frequency change of I2C over 800kbit/s) and the amplitude of the PA (via the PWM of PWM) to sample the microphone input and reconstruct the SSB signal. PA key shaping circuit)
– Fully digital and software-based SDR receiver stage (optional): sample the I/Q (complex) signal from the quadrature sampling tester digital mixer, and perform a 90-degree phase shift in the software (Hilber transform) and eliminate one by adding sidebands
– Three independent switchable analog front-end receiver attenuators (0dB, -13dB, -20dB, -33dB, -53dB, -60dB, -73dB)
– Receiver noise level MDS: -135 dBm (200Hz BW) at 28MHz
– Receiver front-end selectivity: steep tuning frequency -45dB / ten times roll-off +/- 2kHz
– Blocking dynamic range: 20kHz offseIt 123dB, 2kHz offseIt 78dB
– CW decoder, straight/Iambic-A/B keyer
– VFO A/B + RIT and and Split, and switch the corresponding relay band filter through I2C
– CAT support (TS480 subset), you can stream audio, press keys, and display text through CAT
– This is probably the most cost-effective and easy to build standalone SDR/SSB transceiver. Great simplification Simplifies the original QCX circuit (that is, reduces the installation components by 50%, reduces the installation components by 50%, does not require complex transformer windings, and does not require alignment procedures), and is more versatile

Port Introduction:
– Charge: Charging port of the built-in lithium battery and you can only use the supplied charger! It is forbidden to use other chargers!
– Switch: OFF to shut down. BAT: Built-in battery power supply. 13.8: External power supply
– DC13.8V/3A: External power supply port
– KEY: automatic key body connection (A, B, single key)
– PA: External power amplifier, PTT signal
– MIC: External microphone port
– UART: Serial communication port (command compatible with TS-480)
– SPK: External speaker

Package Included:
– 1 x Set of Transceiver

Best 10W Portable uSDX 8 Band SDR All Mode Transceiver USB, LSB, CW, AM, FM HF SSB QRP Transceiver QCX-SSB with Battery good price

Specification: 10W Portable uSDX 8 Band SDR All Mode Transceiver USB, LSB, CW, AM, FM HF SSB QRP Transceiver QCX-SSB with Battery

Type

Type C

Dimensions
Weight 0.7 kg

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

RECENT PRODUCT REVIEWS
  1. Its very good item for me, usually I am using this for charging my power bank (10000mah). Very good.

  2. Excellent android box

    I bought one for us. And to be honest I was VERY SCEPTICAL. But once installed the sky is the limit on what you can do. Our kids are grown with their own children and even the grandchildren know how to operate it and love the video options. So we decided to get them their own and not to brag but mom and dads gift were the bomb. Even the grandchildren were excited 

  3. A+ If you use the right cup!

    After having it for a few days I love it! I tried it with different cups and mugs and you’ll want to use the a mug with a flat base to really spread the heat. I pre heat my mug while my coffee brews and it will stay hot as long as you’d like. I found the default high heat setting worked best for me. It’s not to expensive and makes a great gift. I got mine in black and it looks great on my desk at work.

  4. Yes, it works!

    This thing really works. If you are reading a review that says it doesn’t then they r either not using it correctly or using the wrong product. I did not get paid to use this product or my personal opinion like others. I didn’t want to spend all the extra money on a fancy brand name with the same results. My pics will speak for themselves. 

  5. Perfect nothing to say and accurate data super
    Thanks to seller send fast

  6. Lightly box is pressed in brightness, but writing data is no problem four yo ~

  7. Arrival a few days before the scheduled date, very satisfied. Well packaged, received intact and functional, perfect for sketches, simple design but good for the price. Comes with an anti-loss strap, and the pen easy to store.

  8. I arrived a week earlier than planned, I loved it coming with the battery included, very good product

  9. It didn’t take long to get there, all ok

10W Portable uSDX 8 Band SDR All Mode Transceiver USB, LSB, CW, AM, FM HF SSB QRP Transceiver QCX-SSB with Battery

$27.92

Pricetug
Logo
Reset Password